Trail section

Connector — Forest Trail South Reach (4)

Mile 3.1 – 3.5

Planned

Trail information

ABA §1017.10

Length: 0.33 mi · 1722 ft
Surface: Not yet decided
Tread width: Not yet decided
Running slope: 6.1% typical 44.2% maximum

Where the slope figures come from, and how the section breaks down

A new connector, not yet built. 63.1% of this section is at or below a 5% running slope. About 611 ft is steeper, reaching 44.2% at its worst. Modelled from USGS 3DEP elevation along the traced alignment — not measured on site.

Modelled from USGS 3DEP elevation, sampled every 25 m along the traced alignment. Terrain, not tread.
Slope figures modelled from USGS 3DEP elevation sampled at 25 m along the traced alignment. Terrain estimates, not as-built measurements.
Cross slope: Not yet decided
Step-free: Not assessed — not built

What step-free means here, and why it is not assessed

Nothing on this section has been built, so nothing has been measured on the ground. A step-free answer needs a finished tread, a finished cross slope and a finished surface, and none of the three exists yet.
Walking time: About 9 min
Opens: Fjord Trail North
Assessed: Never — the trail is not built

Traced from FGEIS Figure II-1b — indicative, not survey data.

150 to 199 ft

Modelled from USGS 3DEP · not surveyed

63.1% of the modelled length sits at or below a 5% running slope. The steepest modelled grade is 8.8%.

±15–25 m

Connector — Forest Trail South Reach (4), drawn heavier, with the corridor around it. Indicative alignment — not survey data. Traced from the published FGEIS figures (January 2026) to about ±15–25 m. The trail is not built and the alignment is not final. Open the interactive map with Main Trail, Connectors, Meanders, Trailheads switched on · Read the same features as a list

2 places

3.14

Planned

3.55