Trail section

Connector — Marsh Trail Reach (6)

Mile 6.9 – 7.1

Planned

Trail information

ABA §1017.10

Length: 0.25 mi · 1299 ft
Surface: Natural earth
Tread width: Not yet decided
Running slope: 2.6% typical 7.9% maximum

Where the slope figures come from, and how the section breaks down

An existing trail or route being incorporated into the Fjord Trail. 81.4% of this section is at or below a 5% running slope. About 241 ft is steeper, reaching 7.9% at its worst. Modelled from USGS 3DEP elevation along the traced alignment — not measured on site.

Modelled from USGS 3DEP elevation, sampled every 25 m along the traced alignment. Terrain, not tread.
Slope figures modelled from USGS 3DEP elevation sampled at 25 m along the traced alignment. Terrain estimates, not as-built measurements.
Cross slope: Not yet decided
Step-free: Not assessed — not built

What step-free means here, and why it is not assessed

Nothing on this section has been built, so nothing has been measured on the ground. A step-free answer needs a finished tread, a finished cross slope and a finished surface, and none of the three exists yet.
Walking time: About 7 min
Opens: Fjord Trail North
Assessed: Never — the trail is not built

Traced from FGEIS Figure II-1a — indicative, not survey data.

14 to 34 ft

Modelled from USGS 3DEP · not surveyed

81.4% of the modelled length sits at or below a 5% running slope. The steepest modelled grade is 7.9%.

±15–25 m

Connector — Marsh Trail Reach (6), drawn heavier, with the corridor around it. Indicative alignment — not survey data. Traced from the published FGEIS figures (January 2026) to about ±15–25 m. The trail is not built and the alignment is not final. Open the interactive map with Main Trail, Connectors, Meanders, Trailheads switched on · Read the same features as a list

2 places

6.92

7.13

Planned